22 agosto, 2009

Super originais...

Alphabet Pillow - Custom

Alphabet Pillow - Custom
zoom
Description
These pillows are made from recycled suit-jackets. Some will have buttons, some will have a pocket, all retro awesome tweeds, herringbones and checks.. I have lots to choose from and can do all letters. Both letters are sold, but are a good example of what I can do! Please allow 1 week for me to make it :)
Added on Aug 18, 2009

tags Tags

housewares, pillow, novelty, alphabet, suit, jacket, letter, a, stuffed, decorative, recycled, reused


materials Materials

suit, wool, polyfil, button





VER AQUI






Alphabet Pillow - Custom


Alphabet Pillow - Custom

Alphabet Pillow - Custom








05 agosto, 2009

Animais Fofinhos


Felted Stuffed Animals

These petite stuffed animals-a Fair Isle lamb, a cable-knit chicken, and an argyle pig-are so cuddly and simple to make, you'll want a menagerie. The toys, which range in height from 5 to 8 inches, are each assembled from a few basic felt pieces and plumped up with batting. Appendages, such as floppy ears or wings, are easily added during sewing. Wrap up the woolly creatures to give to your favorite tots, or use them as stocking stuffers.

Before you begin, learn how to felt wool.

Stuffed Chicken How-To
1. Enlarge templates to desired size on a photocopier (for a 5-inch-tall chicken, enlarge 400 percent), and cut out. Using templates as a guide, cut out a side piece from felt; flip template, and cut out another side piece that's the mirror image of the first. Cut out underbelly piece. With right sides facing and 1/8-inch seam allowance, stitch one side to underbelly along lower side portion, from neck to tail, curving underbelly piece to fit.

2. Stitch other side piece to other edge of underbelly, sandwiching underbelly between 2 side pieces. Cut out wattle and comb from felt.


3. Pin wattle and comb, facing inward, between layers of head and neck. Stitch around top of chicken, leaving a hole for stuffing.


4. Turn chicken right side out. Cut out 4 wings. With right sides facing, stitch 2 wings together, leaving a small opening at the base. Turn right side out; hand-stitch opening closed, then hand-stitch to body. Repeat for other wing. Sew a handful of dried beans into a small sack created using a scrap from the sweater. Place inside chicken at bottom, to weight and balance it. Pull cotton or polyester fill into small pieces to prevent lumps, and stuff chicken. Slip-stitch back closed. Steam-iron the finished animal to refine its shape and loosen the stuffing.

Stuffed Lamb How-To
1. Enlarge templates to desired size on a photocopier; for a 6 1/2-inch-tall lamb, enlarge 150 percent. Cut out the templates. Using template as a guide, out the underbelly piece from felted wool. To make legs stand up, fold back each at solid lines, and stitch at dotted lines.

2. Cut out the side piece; flip template, and cut out another side piece that's the mirror image of the first. With right sides facing and 1/8-inch seam allowance, stitch one side to underbelly along lower portion, from neck to tail, curving underbelly piece to fit. Stitch other side piece to other edge of underbelly, sandwiching underbelly between the 2 side pieces. Cut out 2 tail pieces: Stitch, right sides facing, leaving a hole at the base. Turn inside out. and stuff with cotton or polyester fill.

3. Sew dart at mouth. Pin tail, facing inward, between the 2 side pieces. Sew side pieces along top portion of lamb, leaving a gap at the back and at the top of the head. Cut out 4 ear pieces and the top of head piece. Sew together two sets of ear pieces, right sides facing, leaving a hole at the base of each; turn right side out.

4. Cover head: Pin one ear and the top of head piece pointed end facing forward between the layers of the head. Starting in front, sew around the top of the head, stopping when you get to the back. Pin on the other ear, and continue sewing around the head. Turn lamb right side out. Rip fill into small pieces to prevent lumps from forming, and stuff. Slip-stitch the back closed. Steam-iron the finished animal to refine its shape and loosen the stuffing.

Stuffed Pig How-To
1. Enlarge templates to desired size on a photocopier, and cut out. Using template as a guide, cut out the underbelly piece from felted wool. To make legs stand up, fold back each at solid lines, and stitch at dotted lines.

2. Cut out the side piece; flip template, and cut another side piece that's the mirror image of the first. With right sides facing and a 1/8-inch seam allowance, stitch one side to underbelly along lower portion, from snout to tail, curving underbelly piece to fit. Stitch other side piece to other edge of underbelly, sandwiching underbelly between the 2 side pieces. Cut out tail; fold lengthwise, and, with right sides facing, stitch down one side and across one end. Turn right side out. Place a pipe cleaner inside tail; stitch the open end closed.

3. Pin tail, facing inward, between the 2 side pieces. Sew along top portion of pig, leaving a gap at the snout and at the back. Cut out nose, and hand-stitch to snout, right side facing.

4. Turn pig right side out. Rip polyester or cotton fill into small pieces to prevent lumps from forming, and stuff pig. Slip-stitch the back closed. Cut out 4 ear pieces. Sew together two sets of ear pieces, right sides facing, leaving a hole at the base of each; turn right side out, and stitch holes closed. Fold the base of each ear in half, and tack to secure. Hand-stitch ears to head. Twist tail around a pencil to make a curl. Steam-iron the finished animal to refine its shape and loosen the stuffing.

First Published: November 2006

Retirado daqui

02 agosto, 2009

Como fazer Luminária decorada com feltro

luminaria decorada com feltro

Decoradas com círculos de feltro essa luminárias são incrivelmente fáceis de fazer.

Você vai precisar de uma luminária pendente; feltro na cor desejada; pistola e cola quente.

Corte muitos círculos de 5 cm de diâmetro (pode variar um pouco e não precisa ser círculos perfeitos).

Luminária com relevo: dobre o círculo de feltro ao meio para vincar. Passe uma linha de cola quente na parte traseira do vinco e fixe-o à superfície. Adicione tantos círculos e distância que desejar (mais junto fica mais cheio) e vá completando sua luminária.

Luminária lisa: comece com sua camada exterior de círculos e trabalhe no centro. Coloque um ponto pequeno de cola quente na parte traseira do círculo e cole na superfície. Vá adicionando e sobrepondo os círculos até completar.

O resultado quando acesa é excelente!


Retirado daqui