17 agosto, 2010

FLORES DE PAPEL CREPE




6. Doblega el ventall per la meitat a l’alçada del neteja-pipes, i separa cada capa de paper, des de fora cap a dins. Aquesta operació és la més delicada i s’ha de fer amb molta cura, ja que el paper es pot trencar molt fàcilment.

VI AQUI

14 agosto, 2010

Estrelas decorativas de lata

Tin Can Stars Tutorial

Ever since I blogged about my tin-can-star mural in June 2009 I promised to do a tutorial. I kept on putting it off because I haven't done any tutorials before and the whole idea seemed a bit overwhelming.
Not any more! Here it is at last:

This tutorial shows you how to make the stars. You can then use the stars to make anything you want from mobiles to Christmas decorations.

You will need:

Empty soft drink cans
Utility/kitchen scissors
Star template (download and print)
Permanent marker
Ruler
Sharp object. I used an awl, but a thick needle or nail will also work
Flat nose pliers



Step 1:
Cut the can open.
Start by forcing the one edge of the scissors into the can near the top rim and away from the logo. Cut all around.



Cut from top to bottom. Make sure you keep the logo intact by cutting on the bar-code side of the can.



Cut off the bottom.



This is what you have now:



You can now clean the inside of the can to make sure your work surface and hands don't end up all sticky.

Step 2:
Trace the template onto the can with the permanent marker.



Make sure you place the template over the logo and in such a way that you can fit two stars onto each can.





Step 3:
Cut out the stars.





Step 4:
Score the stars.
With the logo side facing up, line the ruler between two opposing internal corners. Use your sharp tool to mark a straight line. Make sure you don't cut right through the metal. Repeat with the other internal corners.



Flip the star over. With the logo side facing down, line the ruler between two opposing sharp points. Score as before. Repeat with the other sharp points.



Step 5:
Hold the star between your fingers and fold on the lines.



Repeat the folding along all the lines.



Use your sharp tool to sharpen the corners and edges.



Step 6:
With your flat nose pliers pinch the sharp points of the star to flatten them and to bend them slightly upwards.



Step 7:
Hold the star down on the work surface and push a hole through the flat ends with your sharp tool. You can put a cutting board or cork tile underneath.



That's it!



If you want the metal side of the star to be on top you have to change the scoring around. The shorter lines (between internal corners) on the metal side and the longer lines (between the sharp points) on the coloured side.


vi aqui

Monotipia - Impressão marmoreada


A monotipia é uma técnica de impressão muito simples. Com esta técnica consegue-se a reprodução de um desenho ou mancha de cor numa prova única, daí o nome “monotipia”.

A prova obtida, monotipia, não é um duplicado fiel do desenho ou mancha original, na passagem para o papel (impressão), as tintas misturam-se fazendo surgir efeitos imprevisíveis.

A monotipia pode ser feita de diversas técnicas.

A monotipia marmoreada consiste na decoração de papel ou tecido com motivos que, pelo seu aspecto lembram o mármore, daí o seu nome. É preparada com tintas de óleo sendo usado este processo para obter padrões de papéis.

Quando secos, os papéis marmoreados podem servir para forrar livros e estantes ou como fundo de outros trabalhos e mesmo para papel de carta. Ao contrário da impressão sobre superfície lisa , esta surpreende pelo seu carácter imprevisível, proporcionando efeitos deslumbrantes.

Materiais e instrumentos:

Tabuleiro de plástico;

Palhinhas, pincéis, pauzinhos ou conta gotas;

Água fria;

Tintas de óleo;

Essência de Terebintina/Aguarrás/diluente sintético;

Frascos de vidro;

Folhas de papel, branco e colorido/tecidos;

Papel de jornal.

Procedimento técnico:

1 - Começa-se por preparar a core ou cores que se pretendem utilizar, pegando-se na bisnaga de tinta óleo e espremendo-se uma pequena quantidade para dentro de um frasco. Junta-se um pouco de essência de Terebintina de forma a se obter uma tinta fluida;

2 - Colocar água no tabuleiro, pelo menos até um quarto da sua altura e, com a ajuda de um pincel, conta gotas ou pauzinho, deixar cair gotas de tinta sobre a superfície da água;

3 - Usando o pauzinho ou outro qualquer dos instrumentos dos referidos, mexer suavemente as manchas de cor, espalhando-as à superfície da água, procurando bonitos efeitos;

4 - Quando os motivos obtidos agradarem, pega-se numa folha de papel, por dois lados opostos, fazendo-a curvar ligeiramente;

5 - Deixar cair lentamente a folha de forma a ficar a boiar na água;

6 - Retira-se a folha da água após mais ou menos três segundos de contacto, sempre segurando-a por dois lados paralelos, deixando-a escorrer um pouco para o tabuleiro.

7 - Coloca-se a folha molhada em cima de papel de jornal para secar, com a impressão voltada para cima.

Este processo só acontece porque as tintas de óleo não se misturam com a água, flutuando à superfície da mesma. É, portanto, possível limpar a água para proporcionar a posterior utilização de outras cores para novas impressões, colocando-se sobre a superfície da água folhas de jornal, tantas vezes quanto as necessárias para que não reste tinta na água.